China manufacturer of magnetic ballasts for metal halide flood lights & hps flood lights

Email:
Support

James  Electronic


Email: Sales@ballastrus.com
URL : www.ballastrus.com

Home » Faq
  • [2015-10-28]
    The trend of led floodlight to protect the environment, the primary symbol of the green development has become the mainstream of the 21st century, and semiconductor lighting is the energy-saving in the successful breakthrough. With the country's high attention to the development of the semiconductor lighting industry and the rapid development of LED technology...
  • [2015-10-26]
    In the event you wish to replace the fluorescent light ballast for any lighting fitting, that you are particular to uncover it proper ideal here. JAMES manufacture a complete and diverse selection of common, specialist and uncommon fluorescent light ballasts within a vast collection of wattages, lengths, magnetic, electronic, cap/base varieties and sizes, fluorescent tubes kinds include T2 (7mm diameter), T4 (12mm), T5 (15mm), T8 (25mm) and T12 (38mm) versions; wattages selection from 4 Watts to 140 Watts; lengths start out off at 200mm growingstart out....
  • [2015-10-14]
    safety: magnetic ballast due to its high power consumption, power consumption into heat, surface temperature rise, especially in the power grid voltage fluctuations, the temperature can reach 120~130 degrees, become a fire hazard, such an accident occurs. In the, the ballast can start up at +10, and the voltage is less than -5, and the grid voltage is less than 180V, and it is not easy to start. Inductance ballast power factor is low...
  • [2015-10-14]
    Fluorescent light ballast has two functions, one is when the starter disconnect the moment of fluorescent lamp circuit generating high voltage, breakdown fluorescent lamp mercury vapor circuit, the filament circuit conduction; the second is self induced electromotive force in the ballast blocks alternating current changes, the flowing through the lamp tube current do not generally understood in fluorescent light ballast in fluorescent lamp circuit with function....
  • [2015-10-14]
    Magnetic ballast drying process is very important, the time can't last too long, it's easy to paint cracking, also can't be short....
  • [2015-10-12]
    High pressure mercury ballast working principle: when the power supply is switched on, beloved voltage between the ignition electrode and adjacent main electrode and add between the two main electrodes. Due to the ignition electrode and adjacent electrodes near, voltage and after between the two electrodes produced glow discharge, make the tube temperature rise, then between the two main electrodes produced arc discharge (breakdown)....
  • [2015-10-12]
    Light ballast TW value should be as high as possible, and the winding temperature rise,Δt should be as low as possible, i.e. TW value and delta T value, indicating better quality of the ballast. General good ballast tw=130] t is less than or equal to 60 (3) for high strength gas discharge lamp inductance ballast, choose as far as possible with the original logo products, this sign is to indicate internal ballast has thermal protector, inverted triangle winning three points in practical application is indicating ballast surface is the hottest Celsius temperature value, generally for 140 ~ 160. With this sign of ballast, when the lamp or the boot device is damaged (generating abnormal state), the thermal protector will automatically act, which can ensure the safety of the ballast and lamp use....
  • [2015-10-06]
    the living space space to lights, decorative lamps on key, functional principle for style and design. Aguilar lights, desk lamp is paired with each area on the auxiliary light supply, as a way to facilitate and room coordination, modeling also strange lights not ideal. If the decrease rooms, accessible Xidingdeng plus landing lights so that the residing room turns into bright and generous, has the sense of the occasions, floor lamp beside the sofa, sofa side table once again with lighting craft lamp, or even the wall near the placement decrease wall lamp, in order that not only read have regional lighting, but also within the conversation obtain site visitors add a cordial and harmonious environment...
  • [2015-10-03]
    Self - ballast fluorescent lamps is often a massive place of energy-saving lighting merchandise, usually called electronic energy-saving lamps or energy-saving lamp. Energy-saving lamps typically by the lamp holder, plastic shell and internal electronic ballasts, fluorescent tubes, that is convenient for use, along with the ratio of incandescent lighting luminous efficiency of five ~ 10 times larger, the common life expectancy of in excess of six times....
  • [2015-09-27]
    In my home 40W fluorescent lamp use more than 3 years,it's not too bad a, but every six months or so to change an electronic ballast and electronic ballast prices to not expensive, 2-3USD, the most expensive 5 USD, but life is short, a few years down to change a lot, open ballast found that all is start capacitor is damaged....
<<<1 2 3 4 5 >>>

 Metal Halide Ballasts  |  High Pressure Sodium Ballasts  |  Fluorescent ballasts  |  Gear Tray
Links: Porcelain lamp socket Mercury Vapor Ballast |  UV LED Lights | Fan and filters | HeidelBerg Parts | LED Flood Light | LED Downlight  | ad gift | china hand tools | micro  speaker  | Jaw Crusher | Clothes hanger | LED Screen

Xml Copyright: @2012-2017 James Lighting Electronic Co.,Ltd