China manufacturer of magnetic ballasts for metal halide flood lights & hps flood lights

Email:
Support

James  Electronic


Email: Sales@ballastrus.com
URL : www.ballastrus.com

Home » Faq
  • [2015-08-18]
    Though most aquarium tank lids usually are not overly pricey, it really is nonetheless a great thought to replace the light ballast when it stops doing work. When the light flickers excessively whenever you flip the light on or the light does not electrical power on whatsoever, it is time for you to change the ballast. Simple family equipment are necessary to alter the ballast and a extremely fundamental understanding of electricity is required. However, transforming the ballast is just not an overly complicated course of action....
  • [2015-08-17]
    Install wiring, must be clear from the external high pressure mercury lamp ballast, self-ballast. High pressure mercury lamp ballast, ballast power must be with high pressure mercury lamp power, we should install the ballast in the vicinity of the fixture body can not touch the position, and is beneficial to the heat dissipation and the rain. Self ballasted type high pressure mercury lamp ballast doesn't have access. High pressure mercury lamp in a vertically installed, it is advisable, when installed horizontally, the luminous flux output (brightness) to reduce 7%, and easy to self destruct. The glass shell is high temperature high pressure mercury lamp radiation must be installed so good. Otherwise it will affect the performance and life of the lamp. Outside the glass shell of the high pressure mercury lamp broken can still shine, when looked at the ultraviolet radiation, harmful to the human body. So HPML broken glass shell should be replaced immediately. The supply voltage of the high pressure mercury lamp should be kept stable. When the voltage is decreased by 5% lights may be suicide, and re start burning for a long time, so high pressure mercury lamp does not directly in the power fluctuations larger lines. Otherwise, should be taken into account to adjust the pressure or voltage regulators....
  • [2015-08-17]
    High intensity discharge lamps require auxiliary gear (HID ballasts, capacitors, ignitors, and power supplies) to supply the correct electrical values for starting and operation. This auxiliary equipment will have to meet all electrical specifications outlined by ANSI (American Nationwide Standards Institute). Venture Lighting Worldwide won't be responsible for bad efficiency, residence injury, or personal damage from lamps operating on unauthorized auxiliary equipment, or from lamps currently being operated inside a method inconsistent with their design and style....
  • [2015-08-16]
    The chain plate: variety of 2.0mm cold bending plate rolling into 148 x 17 x 20mm, throughout the board a complete of 162 block (distinct to practice much tools Accounting), throughout which 122 pieces of chain plate conventional outfitted with each plate is offered with four sets of T8 lamp holder (supplied 500 sets of T5 stent seat); 40 pieces of chain plate common outfitted with E27 (compatible with E26 bulbs aging distinctive seat (provided E14-MR16-GU10 change lamp holder every single 500 socket). Thoroughly chain plate equipped with high breaking miniature circuit breakers, products at the bottom of your chain plate road conducting technique (copper), just about every tools two conductive copper block, every plate put in a complete of two (supplied conductive block 20)....
  • [2015-08-14]
    The light ballast delivers the correct commencing voltage, operating voltage and present on the lamp to initiate and sustain the arc. HID lamps have a damaging resistance characteristic, which leads to them to draw an rising amount of present, therefore require a present limiting device. The ballast delivers these functions. There are many unique ballast types used for for HID lighting. Basically, you can find two main distinctions among ballasts: "lag circuit" and "lead circuit" ballasts. The present in lag form ballasts is controlled by an inductive resistance in series with the lamp, whereas in lead style ballasts it current control is presented by each inductive and capacitive resistances in series together with the lamp....
  • [2015-08-13]
    Metal halide low bay and high bay lights are ideal for applying in warehouses and outlets.It is actually vital to make use of the correct style of fixture for your application....
  • [2015-08-13]
    Pulse start metal halide ballast is definitely the newest style of lighting technologies accessible. The standard sort of metal halide lighting, referred to as “probe start”is no longer utilized in the manufacturing of new light fixtures, courtesy in the federal government. Pulse Start Metal Halide Ballasts (PSMH Ballasts) are the newest technology inside the metal halide market. They are really a lot more efficient than classic probe start metal halide ballasts and also have largely replaced the latter in most applications. The pulse begins are built to function better in cooler temperatures or from higher distances from the light. The new generation of ballasts use substantial commencing voltages to energy lamps, leading to a increased lumen rating....
  • [2015-08-12]
    Electronic ballast generally uses LC series resonant mode, when the lamp is not started, the start of the capacitor at both ends of the 700V to generate a peak high voltage start fluorescent lamp. This circuit is simple and practical, but when the fluorescent tubes appear abnormal phenomenon (such as light tube leakage, light aging, etc.), the high voltage of the lamp tube can not be started. This state is equivalent to the ballast load open circuit, and the characteristics of the LC series resonant circuit, the resonant capacitor ends, not only continue to produce 700V above the open circuit peak voltage, and the circuit of the electronic ballast current up to 1A above)....
  • [2015-08-11]
    using the power supply voltage: 220V frequency: 50HZ standard lamp: E27 environment temperature: -5 degrees Celsius 40 degrees celsius. New products to bid farewell to the shortcomings of the body, are not convenient to use and retraction, compact and practical, such as common desk lamp the same but it reaches the efficacy of disinfection sterilization of medical professional, per square cm greater than national standard 90 microwatts!! Simple operation, no longer use ozone sterilization principle (ozone is not harmful to the human body harmful), the use of extremely strong ultraviolet radiation 254NM sterilization, viruses, bacteria, parasites, all eliminated!! Really let you take the sun to go home, after sterilization will have the sun is the sun in the taste of Oh! (know the sun is the sun drying the quilt of the special application to all kinds of popular virus during the disinfection! The product has the advantages of high power: 15W power is C band, which has a very strong sterilization effect, and the ultraviolet range is about 20 times as high as that in summer. No ozone: ozone has a bactericidal function, but harmful to the human body....
  • [2015-08-11]
    There are three main types of fluorescent powder. First class for ordinary fluorescent lamp and low-pressure mercury lamp and the second class for high pressure mercury lamp and self ballasted fluorescent lamps, the third is UV light source, such as fluorescent lamp and low-pressure mercury lamp fluorescent powder for antimony and manganese activated halogen calcium phosphate fluorescent powder and rare-earth trichromatic fluorescent powder. Preparation of mixed material, the amount of the raw materials must first from the apatite structure was calculated in halogen calcium phosphate, calcium and manganese atomic number and the phosphate phosphorus atom ratio of 4.9:3; followed by weighing, mixing, grinding, sieving, again in a certain atmosphere (general nitrogen), to about 1150 DEG C temperature sintering hours. Remove cooling in ultraviolet lamp were selected and then pulverizing, sieving is finished halogen calcium phosphate fluorescent powder luminescence is by the activation of antimony (sb) and Mn CO activation. The position of the atoms in the lattice to occupy the position of the atoms in the lattice. This material is sensitive to the phenomenon: when the activator Sb absorbs energy, a portion of the energy is released in the form of light radiation, and the other part is transferred to the Ma in the process of the so-called resonance transfer, which makes the radiation of Ma. Therefore, the total radiation depends on the characteristics of the two kinds of activator, and changes with the proportion of its changes, but also depends on the ratio of fluorine and chlorine. Such as in the activation of sb halogen calcium phosphate increased Mn content, it will increase the orange radiation, and the corresponding reduced blue radiation. Using the above phenomenon, as long as the change of Mn content, you can give the different color temperature of halogen calcium phosphate fluorescent powder phosphors of radiation ability and fluorescent powder dispersion is related to the degree of absorption, so the particle size on the luminescence brightness of the great. The size of CaHPO4 is determined by the particle size of the raw material, so that the size of CaHPO4 can be controlled by the size of the crystal....

 Metal Halide Ballasts  |  High Pressure Sodium Ballasts  |  Fluorescent ballasts  |  Gear Tray
Links: Porcelain lamp socket Mercury Vapor Ballast |  Light bulb socket  

Xml Copyright: @2012-2020 James Lighting Electronic Co.,Ltd