China manufacturer of magnetic ballasts for metal halide flood lights & hps flood lights

[2014-08-22]

How does the HID ballast work for HID lighting?...

[2014-08-20]

High Intensity Discharge lamps and ballast...

[2014-08-18]

HPS/MH Dimmable 400W 600W 1000W Hydroponic Electronic Ballast...

[2014-08-16]

How does HID lamp ballast work?...

[2014-08-14]

Pulse start metal halide ballasts...

[2014-08-14]

Lamp ballast for HID lighting...

[2014-07-10]

Magnetic fluorescent ballast VS electronic ballast Low power factor (usually around 0.5) high (above 0.7, with a correction circuit can reach more than 0.9) Energy loss is large (typically about 20% loss of power) is very small (saving 15 - 20%) Low-voltage start-up performance is poor (less than difficult to start 180v) good (150v still normal start) 50Hz flicker strobe effect can not be overcome, for the sight of unfavorable operating frequency 20KHz or more, so no flicker feeling. There 50Hz hum audible noise-free Volume size Light heavy weight (only inductive 2/10 weight) High-frequency radiation is very small large Cheaper expensive Simple and more complex manufacturing processes Fluorescent electronic ballast circuit designs are varied, scientific advances in today's electronic ballast design is moving towards integrated or modular, purpose is to make a simple circuit structure. Electrical performance is more reliable, stable and secure....

[2014-07-10]

The Waterproof lighting fixtures Uses: The lamps used in damp, dusty, rain, coal, dust, boiler places lighting microseismic environment and subnational corrosive gases, such as power plants, pumping stations and other places, but also can be used for lawns, roads, buildings, decorative lighting environment. Features: Lighting electrical integration installation, eliminating the need to install special electrical box convenience of using GL third ring saving ballasts, energy-saving effect is very significant energy saving ballast ring stainless steel shell, dustproof, waterproof, good lampshade made ​​of high corrosion resistance spinning pure aluminum, electro-optical reflecting surface polishing; lamp surface using electrostatic spray transparent mask for prism glass, can reduce direct glare ring demolition site energy-saving ballast and lamp body with stainless steel buckle mixed structure, replace light convenient technical parameters: Corrosion level: 1 The following lamp: E27 100W-175W suitable for mixing sodium metal halide lamps, sodium, mercury mixed light lamps, high pressure sodium, metal halide main plant turbine power plants to zero meters, boilers zero meters , furnace body, coal trestle, ESP, etc. James Lighting products: waterproof / dust / moisture a lampshade manufacturing materials using PS, PS ABS shell with light manufacturing or material; 2, locking design , easy accessibility, optional PC buckle; 3, natural rubber seals, with good sealing waterproof; 4, lampshade using prism design, high transmittance, even soft light; 5, using BJB holder, 0.75 mm wire temperature of 90 degrees, the use of electronic ballasts life of more than 35,000 hours, 6, with moisture, dust, water and shock protection class, etc. IP65; Specifications:. 1 * 18W, 2 * 18W, 1 * 36W, 2 * 36W 1 * 58W 2 * 58W，match with fluorescent ballast, Applications:. overpass, food factories, cold storage, chemical plants, tunnels and other public places...

[2014-06-26]

Germicidal Lightings:UV Disinfection lamp,Ultraviolet lamps,UV-C Germicidal lamps,UVA nail lamps, UV-B lamps,uv lights,uv bacterial killing lamps,etc.ultraviolet lamp,germicidal lamp,Replacement of Trojan 3000 plus, Trojan 3000,Wedeco lamp, R-can lamp,UVC lamp,air purifier, water purifier, water sterlilzer,Aquatic products,water treatment lamp,disinfection lamp,UV-A nail lamp,bacterial killing lamp,quartz sleeve,quartz uv lamps,soft glass uv lamp,replacement of Trojan UVmax A/B/C/D/E/F,TOC lamps,cold cathode uv lamps,amalgam lamps,Aqufine lamp,HVAC purifier,4 pin single ended lamp,anion lamps, air purifier lamps,sterilight replacement lamps,quartz germicidal lamps. The UV lamp has three categories including UV-A、UV-B、UV-C，they can be used in different fields, such as medical sterilization, water treatment, insects killing, tanning bath, and plate exposure. Depending on the wattage of UV lamps and the number that one UV ballast can drive (from one to four tubes), we can manufacture the followingspecification： 1x 8w/11w/20w/32w/36w/40w/65w/75w/120w/150w/160w/180w 2x 8w/11w/20w/32w/36w/40w/65w/75w 3x 8w/11w/20w/32w/36w/40w 4x 8w/11w/20w/32w/36w/40w Installation Requirement Status Indication: Isolation 5V DC Output For Lamp Normal Working Status, And It Can Work As LED Dirver. Wire Gauge: 18AWG Mounting Restrictions: Disconnect Input Power Before Installing or Servicing. Ballast Case Must Be Grounded. Dont Short any two wires of the four output. The Farthest Distance 5 Meter Between Electronic Ballast And Lamp...

[2014-06-25]

How to choose the fluorescent lamp ballast?...